Sorry, I'm not on the site here as much as I used to be. We've not gone traveling this year what with the health situation. I have two boxes on the platform On the one side we keep all of our draining equipment, the other side has our wheel locks etc. The important thing is the tongue weight and there are a lot of discussions on it. We found the boxes very useful. All I did was to put the box where I wanted it. I didn't want it to extend out past the trailer wall. Then I just lined up a drill with the holes on the platform. I think I put four holes in the box. I used the appropriate bolt length with washers and tightened them down. They have been there for three years. Our camper is in storage, otherwise I would send you some pictures..
thanks all for the suggestions. We went with camco pads. We won’t use them often $17 was okay for me. We will see if they crack when moving the jockey wheel over them. They are 14x12, so perhaps two … (View Post)
Thanks for this.. We've been working on something similar, but got stuck on the sewing part. We had the screens cut out and the cords measured and cut. With your info, we can finish... (View Post)
For now I just did the Red/Green thing. A few hose clamps and see how that goes... @TerryV6 Photo size reduced. Moderator (Sorry, I usually downsize my photos) (View Post)
Well, another year of camping possibilities have come and gone. For us, we managed to get the camper from storage to the driveway. The.Rally didn’t happen... sigh... But we spent many evenings sleepi… (View Post)
Well the 7 pin connector was not the first place I would have looked, but... My wife had purchased a rubber cover for it and we always left the cable at a downward angle. I took the cover off and was… (View Post)