City Water Connection Swap Out?

System
System
in Heating/Plumbing & Winterizing
This discussion was created from comments split from: Trailer Jack Woes.

Comments

  • 2Cougs
    2Cougs
    @fuzzypinkbunny- We were just talking about swapping out the city water connection.  Ours periodically becomes loose, and with it so accessible in the CS-S we are thinking a metal connection v plastic might help.  Would love to hear details.
    2016 T@B CS-S silver with white trim and WSU themed
    Pulled by a silver 2017 Chevy Silverado
    Leaves on T@bventures from Spokane, WA


  • Michigan_Mike
    Michigan_Mike
    Is this what you're looking for?  

    Shurflo 65 PSI Wall Mount Water Pressure Regulator Chrome
    Mike - Elmira, Mi / 2019 T@B 400 / 2021 Chevy Silverado LTZ
  • 2Cougs
    2Cougs
    @Michigan_Mike - had just started talking about it... Hadn't gotten to the looking part.  This IS a full service forum!  Reads your mind and helps before you even ask!  Thanks! ;)
    2016 T@B CS-S silver with white trim and WSU themed
    Pulled by a silver 2017 Chevy Silverado
    Leaves on T@bventures from Spokane, WA


  • Michigan_Mike
    Michigan_Mike
    edited September 2017
    No problem!   =)

    According to one review this fixture was priced over $60 at West Marine and half the cost through Walmart's site. It looks pretty nice (I like the chrome) and I'd be curious if it would mount to the T@B since my trailer isn't here for reference?  
    Mike - Elmira, Mi / 2019 T@B 400 / 2021 Chevy Silverado LTZ
  • FishDoctor
    FishDoctor
    edited September 2017
    Michigan_Mike said:
    Is this what you're looking for?  

    Shurflo 65 PSI Wall Mount Water Pressure Regulator Chrome
    It says it is rated at 65 PSI. I thought the normal recommendations was to regulate at 50 PSI. Is that enough difference to be a concern?

    Downers Grove, IL
    2017 T@B 320S Max, Blue and Silver -- "The Blueb@rry"

    2026 States Visited Map-small.jpg
  • 2Cougs
    2Cougs
    We would still use our pressure regulator... We just need the metal connector.
    2016 T@B CS-S silver with white trim and WSU themed
    Pulled by a silver 2017 Chevy Silverado
    Leaves on T@bventures from Spokane, WA


  • SweetlyHome
    SweetlyHome
    I believe this is the manufacturer's spec sheet for this product.  It regulates to 65 PSI, not 50 PSI.  Max. inlet pressure is noted as well.
    Jupiter, Florida~T@B 400, with 2018 Toyota 4Runner

       
  • TabberJohn
    TabberJohn

    When you view that PDF note the graph shows two different models.
    183-X2X-0X is 50 PSI.
    183-X2X-1X is 65 PSI.

    2015 T@B Max S (White/Silver) -> 2014 Ford Escape 2.0L (turbo, AWD, factory tow)
  • davel4wa
    davel4wa
    When I open that PDF from that link, it shows a water system diagram in English and French. There were no part numbers shown. Perhaps the link has changed. The Pentair ShurFlo catalog PDF shows all versions of the wall mount water entry product as regulating at 65 psi. The only 50 PSI product is an inline device 183-039-08.

Categories