Dalehelman

I just replaced the crank with if I remember a 1/2” bolt. Just pop off the top cover for access. I think it was a 6” bolt. I cut off the thread. Then I drilled a small hole in it to match the crank handle. If you are not good with tools. Ask a friend or neighbor. Good luck 

• Activity
• Posts121
• Comments2.3K

• Re: Weight distribution and anti wobble device

  Dalehelman

  March 2018
  @HR_Taly if you do install one of those friction sway control devices. It is important that you disconnect it before you back up. They can bind and it is possible to bend the trailer tongue. You can …
  2

• Re: Adust ride height for AL-KO axles

  Dalehelman

  February 2018
  I have looked into the possibility of a lift kit from Dexter the manufacturer of these axels. Dexter has such a lift kit for torsion axels. The best I have been able to determine is that it will not …
  1

• Re: Pictures of some of my favorite mods

  Dalehelman

  January 2017
  Thanks I love sharing new ideas.
  5

• Re: Frame cracks where tongue bolts to frame

  Dalehelman

  February 2018
  It looks like this thread has been viewed by over 1,300 times to date. At this time we have 6 members of the forum that have reported cracks. I hope this is a good sign. Although as time goes by and …
  2

• Re: Grey water valve pic

  Dalehelman

  February 2018
  Since you have already removed the gray water dump valve. I would do this.
  1

Previous Next