Dalehelman

I just replaced the crank with if I remember a 1/2” bolt. Just pop off the top cover for access. I think it was a 6” bolt. I cut off the thread. Then I drilled a small hole in it to match the crank handle. If you are not good with tools. Ask a friend or neighbor. Good luck 

• Activity
• Posts121
• Comments2.3K

• Re: Checking brake and turn signal lights when you're solo

  Dalehelman

  September 2020
  Correct hazard lights turn signals and brake lights are all on the same circuit.
  2

• Re: Extended A-frame to reduce tongue weight

  Dalehelman

  November 2020
  IMHO Simply a bad idea. Unless you or someone has the proper engineering skills to design the modifications, and a fabricator to do the reconstruction. Good luck.
  3

• Re: Shower sprayer

  Dalehelman

  November 2020
  X2 Oxygenics is a great upgrade.
  2

• Re: Roof rack as tire holder on 2008 TaB

  Dalehelman

  November 2020
  With winter coming if you live in an area where it gets frosty. Heat the inside of the trailer. The moisture and frost under the right conditions will show the cross members on the outside. NuCamp ca…
  1

• Re: keder rail

  Dalehelman

  October 2020
  1915 Tab. Can’t be many of those out there. :)
  3

Previous Next