Dalehelman

I just replaced the crank with if I remember a 1/2” bolt. Just pop off the top cover for access. I think it was a 6” bolt. I cut off the thread. Then I drilled a small hole in it to match the crank handle. If you are not good with tools. Ask a friend or neighbor. Good luck 

• Activity
• Posts121
• Comments2.3K

• Re: Extended A-frame to reduce tongue weight

  Dalehelman

  November 2020
  IMHO Simply a bad idea. Unless you or someone has the proper engineering skills to design the modifications, and a fabricator to do the reconstruction. Good luck.
  3

• Re: Shower sprayer

  Dalehelman

  November 2020
  X2 Oxygenics is a great upgrade.
  2

• Re: Question on H2O Pressure Regulator Used in Winterizing

  Dalehelman

  October 2020
  I don’t think the H20 regulator will work for air only liquids
  1

• Re: EAZ LIFT Sway Control Bar Sufficient on T@B 320 S?

  Dalehelman

  October 2020
  It’s one of those things that is easy to forget. From past experience with a must larger trailer. In a very tight gas station. IMHO if you don’t need one don’t use one. Proper loading is more importa…
  2

• Re: EAZ LIFT Sway Control Bar Sufficient on T@B 320 S?

  Dalehelman

  October 2020
  X2
  1

Previous Next