Dalehelman

I just replaced the crank with if I remember a 1/2” bolt. Just pop off the top cover for access. I think it was a 6” bolt. I cut off the thread. Then I drilled a small hole in it to match the crank handle. If you are not good with tools. Ask a friend or neighbor. Good luck 

  • Re: Filling water tank

    DalehelmanDalehelman
    A short length of flexible hose inserted the filler helps 10” to 12”. Also raising the front of the trailer as far as possible helps to allow air to escape for a more complete fill.

  • Re: T@B Sighting

    DalehelmanDalehelman
    Interstate 90 west bound at the Sprague Lake rest area Washington State. @Ericnliz, @Homebodyatheart, Sandi and I stopped for a break and look what pulled in.

  • Re: Replacing the step

    DalehelmanDalehelman
    A us year or so ago I enlarged the stock step with a piece of 3/4” plywood. Bolted directly to the original step. Cost less than $10. An added benefit is that when retracted it still extends about 6”…

  • Re: Power tongue Jack cost less than a buck

    DalehelmanDalehelman
    I welded a 3/4” nut onto the stabilizer. That way one socket fits all four. Rear Scissor jacks, front stabilizers, tongue jack, and 1/2” lag screws I use for stakes. 

  • Re: Benefits to Sway Bar

    DalehelmanDalehelman
    Reposted Fromm another thread. IMHO If you’re trailer is loaded properly ie tongue 15%-20% of total weight not to exceed TV or trailer specifications neither of those things are needed. I would but m…
Avatar