Dalehelman

I just replaced the crank with if I remember a 1/2” bolt. Just pop off the top cover for access. I think it was a 6” bolt. I cut off the thread. Then I drilled a small hole in it to match the crank handle. If you are not good with tools. Ask a friend or neighbor. Good luck 

• Activity
• Posts121
• Comments2.3K

• Re: From the Sugarcreek, Ohio Facebook page

  Dalehelman

  June 2021
  Most dealership’s deal with only one manufacturer. So they only have one source to deal with. They get to know their one source very well. RV dealers deal with several manufacturers. As a result thei…
  3

• Re: Resolved: Pump Runs Continuously

  Dalehelman

  May 2021
  Glad you’re pump finally pressurized and stopped running. IMHO I doubt the cause and effect was the fill port door. It is not an air tight door and there is no electrical connection to the pump. The …
  2

• Re: Corrosion of Alde Convectors

  Dalehelman

  May 2021
  Just removed the old Century fluid. Looks pretty bad. I am going to strain it through a paint filter to see what I find. Very cloudy. Probably an indication of corrosion. I used a shop vac because I …
  1

• Re: 100% waterless coolant for my Alde no water no corrosion non toxic life time never needs changing

  Dalehelman

  May 2021
  I’d like to get this tread back on target. I will be replacing the Century fluid with the Evans. This will require complete evacuation of the Alde system of any water. In order to accomplish this. I …
  1

• Re: How to remove nüCamp’s Velcro for the seat cushions

  Dalehelman

  March 2021
  I had no problem removing them on 2015. Maybe they are using a different adhesive. Removing the staples will leave small holes. Try using a hair dryer to soften the adhesive for an easier release.
  1

Previous Next