Dalehelman

I just replaced the crank with if I remember a 1/2” bolt. Just pop off the top cover for access. I think it was a 6” bolt. I cut off the thread. Then I drilled a small hole in it to match the crank handle. If you are not good with tools. Ask a friend or neighbor. Good luck 

• Activity
• Posts121
• Comments2.3K

• Re: Single Black & Gray Water Drain Setup

  Dalehelman

  September 2017
  Nice work Mike. For those of you who are afraid of the cutting part. The method I used only requires one cut to the gray water drain pipe. If you were to cut in error it can be easily corrected. Keep…
  1

• Re: Towing with a Class I hitch and a Camaro?

  Dalehelman

  September 2017
  True but apparently that was resolved before his last trip. I would have a reputable hitch installer mount a class 2 hitch.
  1

• Re: Comparison?

  Dalehelman

  August 2017
  Correct Little Guy was just the marketer not the builder. I would want to know more about the builder before I made any decision.
  1

• Re: 400 fuses

  Dalehelman

  August 2017
  The color just designate the amperage for that particular Circuit 
  1

• Re: Starting the frig on propane

  Dalehelman

  August 2017
  There is know real time limit when holding down the red button. It should only take 30 to 40 seconds. If the thermal couple is not directly in the flame it could take longer. 
  1

Previous Next