Dalehelman

I just replaced the crank with if I remember a 1/2” bolt. Just pop off the top cover for access. I think it was a 6” bolt. I cut off the thread. Then I drilled a small hole in it to match the crank handle. If you are not good with tools. Ask a friend or neighbor. Good luck 

• Activity
• Posts121
• Comments2.3K

• Re: Alde Glycol Exchange

  Dalehelman

  December 2018
  I would suggest if you gravity drain once a year. Refilled with a 50/50 mix you would never need to pump the system completely. That way a pump would never be needed. The cost would only be for 1/2 g…
  2

• To all those attending T@Bazona 2019

  Dalehelman

  November 2018
  I have had requests for a couple of my mods. If you’re interested in either of these let me know so that I can bring the proper materials. Rear leveling jacks adapter plates. $45 installed you provid…
  1

• Re: The Alde/Glycol Dilema

  Dalehelman

  October 2018
  That’s why I tested my strips first in a fresh unused sample. There seemed to be no need to change the fluid if measured the same ph acidity level as new.
  1

• Re: The Alde/Glycol Dilema

  Dalehelman

  October 2018
  We have a 2015. I recently checked the ph level with test strips. It tested exactly the same as the new fluid I had on hand. As a result I am not planning on changing it at this time.
  2

• Re: Attention all Spokane and Pacific NW T@D@ T@B and T@G enthusiasts monthly breakfast

  Dalehelman

  October 2018
  See you all Saturday 
  1

Previous Next