Dalehelman

I just replaced the crank with if I remember a 1/2” bolt. Just pop off the top cover for access. I think it was a 6” bolt. I cut off the thread. Then I drilled a small hole in it to match the crank handle. If you are not good with tools. Ask a friend or neighbor. Good luck 

• Activity
• Posts121
• Comments2.3K

• Re: Cassette toilet

  Dalehelman

  August 2020
  @Verna Welcome back.
  3

• Re: Running 3 way fridg on inverter power

  Dalehelman

  July 2020
  @BrianZ Your vent pipe sounds doable. My choice would be a marine through deck water proof cable fitting. Into the front storage tub. First choice would still be the front window, and just pass if th…
  1

• Re: Running 3 way fridg on inverter power

  Dalehelman

  July 2020
  @BrianZ On my test the trailer was plugged into 110. The inverter was plugged into a 12volt outlet. The fridge was plugged directly into the inverter. The seven pin does not provide enough power to m…
  1

• Re: 2020 T@B 320S boondock 3 way Norcold fridge not cooling on electric -Resolved

  Dalehelman

  July 2020
  Basic question is the fridg plugged into the outlet located right side under the sink. It may operate on propane even if it is not plugged into 110. I am not sure I have never tried it. Test to see i…
  1

• Re: Make your T@B easy to push/pull in gravel or dirt with a 10" Croft Pneumatic Wheel Kit!

  Dalehelman

  June 2020
  @MuttonChops not to try and one up you, but I tried this set up. Great on hard surfaces no good on soft.
  1

Previous Next