Dalehelman

I just replaced the crank with if I remember a 1/2” bolt. Just pop off the top cover for access. I think it was a 6” bolt. I cut off the thread. Then I drilled a small hole in it to match the crank handle. If you are not good with tools. Ask a friend or neighbor. Good luck 

• Activity
• Posts121
• Comments2.3K

• Re: Boondock Style Cargo Nets

  Dalehelman

  June 2018
  @BrianZ Could you please be a little more detailed description and instructions 😂😂😂😂
  9

• Re: Alde 3010 Compact Heater

  Dalehelman

  June 2018
  Also make sure there is power to that outlet. Try plugging a light into it and see if it lights up. If not reset the breaker by turning it to the off position then to the on position 
  2

• Re: moving trailer by hand

  Dalehelman

  June 2018
  I think sometimes people are talking about moving their trailers around at their camp site by hand. We reposition our trailer by hand at most sites. That’s one of best things about aT@B the single ax…
  3

• Re: UCamp 18 rally ( replace your rear stabilizers with true scissor levelers)

  Dalehelman

  June 2018
  @BrianZ Correct. Plus the added benefit that you can unhook your trailer. Reposition your trailer on site to take better advantage of a view or site. Without having to roll up on leveling devices. No…
  2

• Re: Power tongue Jack cost less than a buck

  Dalehelman

  June 2018
  I recommend 18 volts or greater. I can’t remember the last time I used a corded drill. 
  3

Previous Next