Dalehelman

I just replaced the crank with if I remember a 1/2” bolt. Just pop off the top cover for access. I think it was a 6” bolt. I cut off the thread. Then I drilled a small hole in it to match the crank handle. If you are not good with tools. Ask a friend or neighbor. Good luck 

• Activity
• Posts121
• Comments2.3K

• Re: Norcold 3-way auxiliary fan kit- my install in 2018 T@B 320S

  Dalehelman

  August 2019
  Cut the hole add the fan your fridge will love you for it. I did this to allow even more air flow.
  1

• Twisted chains revisited

  Dalehelman

  July 2019
  Here is a great video I found on FB https://youtu.be/clj42no4DxY
  4

• Re: New Circuit, Bathroom Handle, and Canvas cover (and fantastic fan)

  Dalehelman

  July 2019
  Here is another possible location 
  2

• Re: Adding a bathroom Porthole window to a 320s ?

  Dalehelman

  July 2019
  We picked up the porthole window while at the 2018 rally. It can be mounted most anywhere on the wall. We determined where we wanted it from the inside. It doesn’t have to be in the same location as …
  2

• Re: Looks like I need to Replace the Black tank knife valve

  Dalehelman

  June 2019
  That flange is glued to the 90* elbow and is impossible to separate. It can be cut off and the elbow rebored with a special 3” cutting tool. First I would buy a can of ABS cement. Clean the surface w…
  1

Next