All users please be aware that the forum will switch to the new format this weekend (May 2-3 2026). You will see some changes in font and color and location of posts but basic functions should remain the same. Please post to the Help category if you experience issues.
Thanks
qhumberd
Moderator
Thanks
qhumberd
Moderator
-
Re: Installed Larger Sink in 2021 400
Here's the faucet we installed with our larger sink. https://www.amazon.com/dp/B07MDVYCCG?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_4&th=1 Looks like the larger sink I got is no longer avai… -
Re: Alde service
I use a Ridgid 3 gallon shop vac with the 1.25" hose end. I just use a bunch of duct tape to connect it to the hose. It's really easy when you have the closet version 400. -
Re: Repairing roof after removing dealer-installed solar panels (2018 Tab 400)
@ReenieG I used only 1/2" 3M 5952 tape with no other sealant or adhesive. The gaps were only an inch wide at each lower corner in case water got under the panel so it could drain out. 1" wi… -
Re: Repairing roof after removing dealer-installed solar panels (2018 Tab 400)
I placed the 1/2" VHB tape around the perimeter of the panel, with a one inch gap at the bottom corners for drainage. Make sure both surfaces are clean, with 3M adhesive remover or mineral spiri… -
Re: Dicor curing question / vent cap replacement
Nice! A heat gun really helps with butyl tape removal in the future.
