All users please be aware that the forum will switch to the new format this weekend (May 2-3 2026). You will see some changes in font and color and location of posts but basic functions should remain the same. Please post to the Help category if you experience issues.
Thanks
qhumberd
Moderator
Thanks
qhumberd
Moderator
-
Re: What to expect with the Norcold on 12V ?
Have you noticed the volt meter on your dash board going down to 12v after driving awhile? The truck ecm will see the truck battery as charged and reduce the alternator output. To ensure constant 14v… -
Re: Battery not charging when driving.
Just because you bought a new battery doesn't mean it's actually good. -
Re: Side tent setup problem
I had to send my tent back to Pahaque for them to add a wedge of material on the back wall. The corner did not reach the ground properly. This was done under warranty. This also caused the velcro on … -
Re: KEEP BATTERY CHARGED WHILE USING THE NORCOLD 3-WAY ON 12V
So, what your saying is turn on the lights (which should be on anyway for safety) =) -
Re: Towing hardware advice needed
TerryV6 Get a 4 foot pipe to put over the pipe wrench for more leverage. Your not torqueing down the nut enough to keep it tight. Also, you do have a lock washer under the nut?
