-
Re: Can I fix this leak?
Of course, you may have to replace a section, or splice a bit in with a double-barbed connector, to get the desired length.1 -
Re: Can I fix this leak?
If you buy a Pex A crimping tool like this https://www.amazon.com/s?k=pex+crimping+tool the tool also will cut the clamp. Simply do that, cut the compromised end (with the pipe cutting tool provided)…1 -
Re: Brakes appear uneven
Great suggestions from Tabiphile! Also, it might be helpful to measure amperage to the magnets, applying the brakes (gently, but consistently) with the hubs off. If the two sides are different, due t…1 -
Re: Brakes appear uneven
On my 400 the emergency break-away brakes are wired to the 12 volt side of the converter, so the battery needs to be on, as noted above, or the trailer needs to be plugged in to shore power for the b…1 -
Re: bathroom floor by drain flexes?
My guess is that a soft spot is not a good thing. I have a 2018 400. The bathroom floor consists of a fiberglass layer on top, approximately 1/8”, over about a 1/2” layer of closed cell foam insulati…1
