Handy tool for your trailer!

Michigan_Mike

Here is a handy little tool kit to have for your trailer and something that was worth it's weight in gold on my recent trip up to Alaska.  I found it at an O'Reilly's auto-parts store up in Alaska when I couldn't find the square bit needed for the square head style screws on my trailer.  You will need the square bit eventually and this small set of bits (costs about $10) is a nice addition that can be carried compactly in either your car or trailer.  I do carry a small bag of hand tools with me in my vehicle, and since the factory uses the square head style screws in the trailer I highly recommend that you have this bit and an adaptable screw driver with you as it will definitely come in handy down the road.  



This is the square head screw below that the factory uses in the trailers.

Michigan_Mike

I did some of that screw tightening last night while cleaning up the trailer after the 1400 mile trip up the AL-CAN highway from Dawson Creek, BC to Delta Junction.  My fenders were literally sand-blasted and are now badly pitted from all the loose rock, grit and gravel along the way so I need to resolve that issue too.  Other than loosing all but two LED lights on the driver's side rear tail light I fared well and came home with any rock chips in the windshield, nor any flat tires in 10K miles of travel there and back home to Michigan.  

Nomad

Yep, got a similar set - And inspect/tighten the screws every couple months.
Sandra - On mine, the screws on the tail lights are a different size as I recall so you may need another screwdriver.

Nomad

I got my set at Home Depot.

Kats

Mike, how did you like AK? I am a proud graduate of the University of Alaska, Anchorage.