Zerk fittings

Vaag
Vaag Member Posts: 2
in Trailer & Towing
I have a 2007 T@B. I thought I had maintenance-free fitting but it is possible that I need to perform maintenance on the fittings. Any advice is appreciated!
· Share on FacebookShare on Twitter Share on Google+

Comments

  • T@Buhura
    T@Buhura Member Posts: 97
    Hi Vaag, the Dutchman T@Bs use the ALKO chassis and axle which use sealed/automotive bearings. They are maintenance free.
    2006 Dutchman T@B T16, 2010 Volvo XC90 3.2 R-Design
    · Share on FacebookShare on Twitter Share on Google+
  • Mouseketab
    Mouseketab Member Posts: 1,238
    There ARE Zerk grease points for the surge brake mechanism. Very easy to use a grease gun once a year. They are located under the tongue. Just shoot some automotive grease into the two fittings using a grease gun with the correct Zerk fitting.
    Carol
    MOUSE-KE-T@B
    2007 Dutchmen T@B Clamshell #2741
    2022 nuCamp T@B 320 CS-S
    2021 F-150 502A Lariat SuperCrew, 3.5 EcoBoost 4x2
    Harvest, AL
    · Share on FacebookShare on Twitter Share on Google+
  • Cyclonic
    Cyclonic Member Posts: 1,232
    While the ALKO bearings are maintenance free and do not have to be greased, they do wear out over time.  I think LG still carries them.  Any mechanic should be able to replace them.

    States the T@Bpole has camped, so far ;)
    Nathan & Becky... 2013 Ford F150 FX4 TAB HLR... 2012 LG T@B T@Bpole.
    Sterling, VA
    · Share on FacebookShare on Twitter Share on Google+

Categories