Lagun Table issue

lkc001
lkc001 Member Posts: 877
in Products and Accessories
Hello all--I had to order a replacement "arm" with bushings already installed from Lagun because the old arm had a bushing completely disintegrated and had been sagging lower and lower on the end opposite from the upright support arm over the last year or so.  I just got the new arm and it is STILL SAGGING??  Anyone know what is going on with this?  The bushings and the plastic tip on the upright post are all in brand new condition.  So disappointed.
2018 Tab 400
2016 Nissan Frontier SV 4x4 Crew Cab

Comments

  • Mickerly
    Mickerly Member Posts: 486
    Can you describe "sagging."
    2018 320CS-S
    "Just Enough"
  • MuttonChops
    MuttonChops Member Posts: 2,009
    Feel your pain @Ikc001

    I had to replace the floor post end plastic bushing on the Arm a few years ago.
    Lagun advertising says "Table Can Stay Up" during travel but it really cannot.

    Even when I provided pictures . . . Lagun said "that's odd" . . .

    I just replaced the bushing, much much cheaper than an Arm Assembly.
    It was a bit of a pain to get the new bushing seated . . . .


    '18 320 S,  pitched axle, 3020HE; PNW based
    TV: '17 Colorado V6 Z71 4x4, Tow Package, GM Brake Controller
    TV: '25 Canyon AT4
    Adventures:  58   Nights:  405  Towing Miles 50,180
  • donmontalvo
    donmontalvo Member Posts: 187
    https://pantherrvproducts.com/lagun-06223-dining-table-leg-replacement-bushings
    Don Montalvo | Retired Veteran | Full time boondocker
    Camper: nuCamp T@B 320S BBC | 12V 2x100Ah LiFePO4 | 600W Solar
    Tow Vehicle: Jeep JLU Rubicon | 12V 100Ah LiFePO4 | 200W Solar
    https://revkit.com/donmontalvo/ | https://donmontalvo.com

Categories