Home› Battery/Electrical & Solar

15 amp fuse in 2018 320 cs-s below bench in control center for overhead lights keeps popping

LawyerboyLawyerboy Member Posts: 125
edited November 29 in Battery/Electrical & Solar
Happy Thanksgiving to you and yours everyone.  So, noticed no overhead lights or porch light.  Went into the converter center and noticed a red light on to the right of the 15 amp flat blade fuse.  Bought replacements, and each time I install and send power to the trailer, that one pops again.  I have the above fan running.  The radio is lit up.  I have a dehumidifier plugged into the gfi outlet left of the converter. Any thoughts would be appreciated.  TY so much.  Mark
· Share on FacebookShare on Twitter Share on Google+

Comments

  • MuttonChopsMuttonChops Member Posts: 1,872
    While I don't have direct knowledge of the 2018 CS-S wiring . . . in general nüCamp connects all the 12VDC lights to the same fuse or two fuses.

    For the12VDC lights that are not turning on . . . the most likely issue is a bad connection at one of the light fixtures.  One of them is shorting the +12VDC to the return/ground wire; it could be in the fixture (bulb area), switch, or the wire connections.

    Again that's the most likely source, investigate and let use know what you find.
    '18 320 S,  pitched axle, 3020HE; PNW based
    TV: '17 Colorado V6 Z71 4x4, Tow Package, GM Brake Controller
    TV: '25 Canyon AT4
    Adventures:  57   Nights:  399  Towing Miles 49,190
    · Share on FacebookShare on Twitter Share on Google+
  • LawyerboyLawyerboy Member Posts: 125
    Thank you.  Ironically I replaced the galley overhead light. The wire was short.  Wonder if it came loose. Will advise.
    · Share on FacebookShare on Twitter Share on Google+
Sign In or Register to comment.