First mod for our Tab Outback

BirdieJane · April 2017

ok wife wanted dish storage so here is my effort.

Image: https://us.v-cdn.net/5021717/uploads/editor/j4/0l9cjoft10f2.jpg

Image: https://us.v-cdn.net/5021717/uploads/editor/ay/8nmhrdd7v9uf.jpg

Homebodyatheart · April 2017

That's a sweet little drawer! Nice job!

BirdieJane · April 2017

They are sitting in cutouts with foam, kept in place side by side with pegs and held down by stretchable 3/16 cord. Drive 600 miles so far so good.

dragonsdofly · April 2017

Awesome.

driftless · April 2017

How did you make the pullout. Pretty sweet.

BirdieJane · April 2017

I found a piece of hardwood toolbox top at Home Depot. Cutout circles for the dishes. Removed the cabinet door. Measured depth and width. Purchased selfcloseing drawer slides, used 3/4 pine to attach right side slide then used industrial Velcro to attach the slide to the outside wall no screws in the wall. Left side slide attached to two piece's of 3/4 pine to attach the slide to the cabinet wall.

ericnliz · April 2017

@BirdieJane, Very nice job! Also noticed you made a hole for the floor vent.

Runtarooti · April 2017

That is a great idea! Great job.

First mod for our Tab Outback

Comments

Categories