Bike rack welded to receiver

System · October 2017

This discussion was created from comments split from: What teardrop to buy?.

Bert · October 2017

It's possible to weld a 2-inch trailer hitch extender (7 to 9 inches long) on a piece of angle iron that is welded or bolted just in front of the Outback tub. Then you can mount an Allen three-bike hitch rack vertically in the extender. The beauty of this arrangement is that you can use the same rack mounted in your truck's hitch when you're leaving the Tab to take your bikes on an outing.

Dalehelman · October 2017

Don’t forget to consider reduced turning radius.

[Deleted User] · October 2017

I thought the same thing. Was going to notch out part of cover to move it back a little.

Bike rack welded to receiver

Comments

Categories