ChrisFix

@Snoblett The cap on the top of the vertical rod (you can see the seam) comes off. Gently pry it upwards to remove it and that will release the horizontal piece that has the escutcheon that attaches … (View Post)

@VictoriousJane Just something to check / ruleout... Is the barbed quick-connect hose end of the outdoor hose fully engaged into the socket in the Nautilus panel. Mine is hard to get fully seated (wh… (View Post)

The factory installed Victron on the T@B 400 is the 75/15 unit. It isn't large enough to add additional panels to. https://www.amazon.com/Victron-BlueSolar-MPPT-Charge-Controller/dp/B018M88G98 (View Post)

@Giota The Dexter axle hubs on your T@B have a grease fitting for a system Dexter calls EZ Lube, which can be used to replenish the bearing grease. See Dexter's YouTube video here: https://www.youtub… (View Post)

@tcassem Your photo shows white (neutral) and black (hot) 115V going into the fixture and the red and gray should be the hot and neutral to a downstream protected fixture (the load). Not certain of t… (View Post)