Dalehelman

I just replaced the crank with if I remember a 1/2” bolt. Just pop off the top cover for access. I think it was a 6” bolt. I cut off the thread. Then I drilled a small hole in it to match the crank handle. If you are not good with tools. Ask a friend or neighbor. Good luck 

• Activity
• Posts121
• Comments2.3K

• Re: Best place to splice for rear 12v outlet?

  Dalehelman

  March 2017
  I have tapped into both rear lights and installed 12 volt outlets. The wires to the lights was more than adequate on our 2015. 
  1

• Re: Those suckers are hard to get off!

  Dalehelman

  March 2017
  T@Bs are always welcome to stop by. Sorry HOA does not allow overnight. There are Walmart's nearby.
  1

• Re: Those suckers are hard to get off!

  Dalehelman

  March 2017
  I've done several over the last few months while we were down south. Takes about 30 minutes.
  1

• Replacing stabilizing jacks with leveling jacks (Revisited)

  Dalehelman

  December 2016
  How to install rear leveling jacks. With no modification to jacks or trailer. A simple adapter plate can be made from an 11" piece of 2"x 3/16 flat piece of steel from Home Depot. The yello…
  1

• Re: T@B Sighting

  Dalehelman

  March 2017
  We sited one about 3 days ago on the Colorado River in Laughlin Nevada at the Nevada State park campground. Sorry no picture. I know if there is no pictures it didn't happen.
  1

Previous Next