Dalehelman

I just replaced the crank with if I remember a 1/2” bolt. Just pop off the top cover for access. I think it was a 6” bolt. I cut off the thread. Then I drilled a small hole in it to match the crank handle. If you are not good with tools. Ask a friend or neighbor. Good luck 

• Activity
• Posts121
• Comments2.3K

• Re: Frame cracks where tongue bolts to frame

  Dalehelman

  February 2018
  Someone on Facebook questioned tongue weight. The other T@B had cracks on both sides was completely stock no extra weigh. The tongue weight on ours is under 200lbs.
  1

• Frame cracks where tongue bolts to frame

  Dalehelman

  February 2018
  This problem has been discussed at least once before. While we were at Tabazona 2018. I was doing the single dump valve mod on a friends T@B .I discovered cracks around the front lower bolts that att…
  1

• Re: Frame cracks where tongue bolts to frame

  Dalehelman

  February 2018
  First picture is driver side second picture is passenger side.
  1

• Holding tank odor revisited

  Dalehelman

  February 2018
  Just a reminder to old and new T@B wet bath owners. If you experience a sudden increase in holding tank odor. It is most likely caused by the water evaporating in one of the two “P” traps. Either the…
  2

• No more swinging door

  Dalehelman

  January 2018
  This is a Mod that I have added to other RVs we have owned. With it there is know more need to latch the door open manually. It will help to control the door In windy conditions as well. Cost about $…
  9

Previous Next