Dalehelman

I just replaced the crank with if I remember a 1/2” bolt. Just pop off the top cover for access. I think it was a 6” bolt. I cut off the thread. Then I drilled a small hole in it to match the crank handle. If you are not good with tools. Ask a friend or neighbor. Good luck 

• Activity
• Posts121
• Comments2.3K

• Re: Frig temp digital readout

  Dalehelman

  September 2016
  Loosen this screw. Then tuck the probe and wire under the metal strip. I used gorilla tape to secure the wire in the groove under the shelf. Any small on off switch will work. I already had a small p…
  1

• Frig temp digital readout

  Dalehelman

  September 2016
  For about $10 temp gage from Amazon less than $7 on off push button switch from Radio Shack about $2 2 wire conectors
  2

• Re: Replaced stabilizers with leveling jacks

  Dalehelman

  September 2016
  I purchased the jacks from Camping World manufactured by Stromberg Carlson cost $57 for the pair. I do not feel the front is necessary with three lift points you have a tripod. Once you are level the…
  1

• Replaced stabilizers with leveling jacks

  Dalehelman

  September 2016
  I replaced our rear stabilizing jacks with scissor type leveling jacks. For those who question weather the frame is strong enough. Little Guy recommends supporting the full weight on the rear jacks a…
  4

• Re: Flame Genie review

  Dalehelman

  August 2016
  Cyclonic seeing yours at Tearstock was what prompted me to buy ours. Thanks 
  2

Previous Next