Dalehelman

I just replaced the crank with if I remember a 1/2” bolt. Just pop off the top cover for access. I think it was a 6” bolt. I cut off the thread. Then I drilled a small hole in it to match the crank handle. If you are not good with tools. Ask a friend or neighbor. Good luck 

• Activity
• Posts121
• Comments2.3K

• Re: New user of T@B 320S trying to fill water tank

  Dalehelman

  August 2018
  I have found that the only way I can completely fill the fresh water tank is to raise the front of the trailer as far as possible. It fills much faster and less air gets trapped in the tank. 
  6

• Re: The 2018 rally begins...

  Dalehelman

  July 2018
  Using the AC in the T@Bs was really not a problem for us even with the frig. On 110. We shared a 20 amp with another T@B.
  1

• Re: Replaced stabilizers with leveling jacks

  Dalehelman

  July 2018
  It’s not that the stabilizers can’t support the weight. It’s the way the stabilizers are designed that is the problem. As the stabilizers move they come down in an arc. Once they contact the ground t…
  4

• Re: Relationship of fresh water tank to hot water tank

  Dalehelman

  July 2018
  Correct as stated.
  2

• Re: What does your frame look like before the T@B is built?

  Dalehelman

  May 2018
  Is that really all that secures the tongue to the main frame on the 400?
  2

Previous Next