Dalehelman

I just replaced the crank with if I remember a 1/2” bolt. Just pop off the top cover for access. I think it was a 6” bolt. I cut off the thread. Then I drilled a small hole in it to match the crank handle. If you are not good with tools. Ask a friend or neighbor. Good luck 

• Activity
• Posts121
• Comments2.3K

• Re: Converter won't stop running

  Dalehelman

  September 2017
  It runs when charging the battery until it reaches float level. This can take several hours depending on the degree of discharge. It will also come on if you have a high amp draw from something like …
  3

• Re: Dripping shower in 2015 SMAX

  Dalehelman

  September 2017
  Vacuum brake. Prevents water from siphoning back into fresh water system. A current code requirement.
  2

• Re: Black Tank Flush Systems

  Dalehelman

  September 2017
  Correct. What you see on the roof is the fan vent for the AC.
  4

• Re: Surge Brakes

  Dalehelman

  September 2017
   All surge breaks operate on the inertia principal. If you use light braking pressure most times the brake will not engage. Once the trailer starts to push the tow vehicle under stopping conditions t…
  1

• Re: Surge Brakes

  Dalehelman

  September 2017
  Most of the time you will not feel them come on.
  2

Previous Next