All users please be aware that the forum will switch to the new format this weekend (May 2-3 2026). You will see some changes in font and color and location of posts but basic functions should remain the same. Please post to the Help category if you experience issues.
Thanks
qhumberd
Moderator
Thanks
qhumberd
Moderator
-
Re: Victron App Load Output Current
I'm pretty sure that "Load Output" reading is from the "load" connection on the Victron controller. I think that most T@Bs are wired so that the controller doesn't have … -
Re: Just picked up a new 320 S Boondock can't unhitch the coupler ? I tow with a Jeep Gladiator, Ideas?
A few other things to try: Lower the jack again and then hold the lever up continuously as you crank it up again. Roll the trailer forward onto leveling blocks (both sides) to flatten out the tongue … -
Re: Just picked up a new 320 S Boondock can't unhitch the coupler ? I tow with a Jeep Gladiator, Ideas?
If you backed into a spot, try pulling forward even just a few inches before trying to uncouple. This can relieve some of the pressure on the hitch, allowing the coupler to open. -
Re: Battery Box for 200ah
As @Denny16 points out, a lithium battery doesn't really need a box, except to protect it from the elements. I have a mouse problem where I keep my trailer, so I didn't want to use a tradit… -
Re: Table Replaced
The table that came with the 2013 T@Bs is heavy and cumbersome. It was the very first thing I changed. If you're in California and you have a clamshell, you can have mine. There are much better…
