-
Re: Corrosion of Alde Convectors
@fstop32, I would be hesitant to try this. The glycol jacket needs to be completely full, and since the Alde is not normally a closed system I would expect expansion of the glycol to cause a mess at…1 -
Re: Bearing Maintenance
Here's a good diagram (from the Dexter service manual) of how the EZLube works: Although they look similar on the face, if I understand Bearing Buddies correctly they are just a cap with a zerk …2 -
Re: Bearing Maintenance
This has come up in the distant past, but it is worth repeating for the benefit of new owners. There is quite a lot of dead space between the hub and spindle that may not have been filled with grease…2 -
Re: Battery thoughts
I'm not very knowledgeable about lithium batteries, but what you describe is a symptom of dead or dying batteries in general (and I've seem a fair number of those). However, as Marceline su…1 -
Re: Corrosion of Alde Convectors
Thanks for he additional photos, @BrianZ. I'm thinking now the differences I'm focusing on inside the tubes may just be a matter of time and age (six years as opposed to three). I still don…1
