All users please be aware that the forum will switch to the new format this weekend (May 2-3 2026). You will see some changes in font and color and location of posts but basic functions should remain the same. Please post to the Help category if you experience issues.
Thanks
qhumberd
Moderator
Thanks
qhumberd
Moderator
-
Re: Expectations of solar vs reality?
@tabranger - first screenshot indicates that you are bulk charging at 1.20 A and the shunt indicates the battery is fully charged. The shunt rested battery voltage typically drops over several hours.… -
Re: Expectations of solar vs reality?
I would set the tail current at .5%, otherwise, the SOC will read 100% when your battery current is 8 A. Not sure I would set the discharge floor to 0 on any battery. Set the charged detection time t… -
Re: The Truck Charging Trailer thread...
I’ll borrow from @Mouseketab here: ” FYI, the easiest way to tell if you have a charge line without any meters. (This method does not tell you how efficient it is). Turn off your T@B battery by disco… -
Re: T@B 400 Alde corrosion
Not sure which pump is for the main Alde and which for the flow, but I think the 400 setting is typically set at 2-3. Can any 400 owner confirm? -
Re: ‘22 Tab 400 fresh water drain won’t drain
Check the fresh tank overfill/vent. If it is clogged by a mud dauber/bug nest, you may not be able to drain. If it is clear, can you use a compressor hose to displace any debris that has accumulated?…
