grassgd

This is a hard question to answer. Made so many mods, some were pretty major and some were easier to do. I list one of each: First the major was to add a storage compartment to the front of the trail… (View Post)

Mine is a 2019 Tab 320s and it has a strainer on the inlet of the pump. I assume you have one too. Check to see if it is clogged with something. That would cause the pump to run and no pressure out. (View Post)

I had the storage compartment out to facilitate repair of the Alde heat convectors which had the dreaded corrosion and decided to make a proper modification to secure the insulation board I had repai… (View Post)

Installed a relay to modify the wiring on Danby AC so the fan cycles on and off with the compressor. Tested it out in my driveway and found it works extremely well at controlling the humidity. Outsid… (View Post)

Finished repair and installation of the convectors which I repaired by cutting off the corroded ends and coating with 2 part epoxy. I mechanically cleaned the inside of the convectors and EPDM hoses … (View Post)