Hitch drop for 3rd gen Toyota Tacoma

chuty

I got a 2020 tacoma to pulled our 2019 320s boondock edge with a 2'' drop hitch. the tounge of the trailer look slightly tilt down. I can't find any 1'' drop or less. any suggestion is greatly appreciated.
Thanks.

justdoit70

IMHO if you flip your hitch It will put you where you need to be.  

chuty

@justdoit70 Didn't even think of doing that I sure will flip it and see how it work out
 Thanks a lot

chpiv

 I believe mine has a two inch drop also.  I added a ball that was one inch taller from Amazon.  I now tow level.  I have a 2015 T@B 320.  I also purchased a longer hitch which allows me to open the tailgate while hooked up.  I believe I got it from ETrailer.

chuty

@chpiv I will check amazon to see if I can get the taller one like you suggest  
Thanks

mntrails

@chuty, I use a Toyota receiver on my 2018 4Runner.  Measuring drop can be inconsistent but its approximately a 1" to 1-1/4" drop and is a perfect match with my 2021 320 Boondock.  Its Toyota p/n P1228-89445. Possibly another option to consider.  Its a very heavy duty receiver as well.

chuty

@mntrails if it's 1'' or 11/4'' drop it may work perfect I'll check it out
Thank you

mntrails

I went out and measured - bottom of the flat stock is even with the bottom of the inside of the receiver tube. The flat stock is 3/4". The top of the flat stock is 1-1/4" to the top of the inside of the receiver tube.  I'd call that 1-1/4" drop.  Plus, its a nice short receiver so less moment arm and thus doesn't add more leverage to the trailer tongue weight.  I did see one on amazon. I hope the measurements help.

chuty

I just found one at a toyota dealer near me part # PT228-89445
will go over and see if it would work . Thanks again

chuty

Just talk to the dealer and they said this one does not work with my truck. oh well keep on trying.

chuty

found curt hitch ball 40033 1'' rise on amazon and trailer sit even now 
Thanks @chpiv and everyone here for the help.