Alde Ground

RCB

I know this has been discussed, but I cannot find it.
There was discussion on how to add a ground wire to our Alde . As I recall, it was simply adding a wire connecting the Alde cabinet to the 12 v ground bus . Can someone please confirm this and/or refer to the earlier discussion. Thanks.

pthomas745

One of these threads, if you haven't found one of them specifically.

https://www.google.com/search?q=alde+ground+wire+site:tab-rv.vanillacommunity.com&client=firefox-b-1-d&sxsrf=APwXEdexVjMKoh7aRPIsqOGNNEJ1qQypqQ:1682270112722&ei=oGdFZKTdK_PEkPIPhceZwAo&ved=0ahUKEwikrfDDwMD-AhVzIkQIHYVjBqgQ4dUDCA8&uact=5&oq=alde+ground+wire+site:tab-rv.vanillacommunity.com&gs_lcp=Cgxnd3Mtd2l6LXNlcnAQA0oECEEYAVDdCFjHL2DaNWgBcAB4AIABPIgBwgqSAQIzMpgBAKABAcABAQ&sclient=gws-wiz-serp

Sharon_is_SAM

Our after market fan developed a short and nuCamp repaired it.  At the time, the Alde fuse had blown, so nuCamp grounded the Alde directly to the battery negative terminal.

https://tab-rv.vanillacommunity.com/discussion/5813/running-a-ground-from-the-alde-to-the-battery

BrianZ

@RCB here is my documentation for running an additional 8G ground wire from Alde to ground bus bar, and from there to J-box on front chassis, then to battery/bus bar..
https://tab-rv.vanillacommunity.com/discussion/comment/189044/#Comment_189044
(This page plus previous page from there).
PS:
Nucamp also offered a method of re-grounding the Alde in Feb of 2022:
https://nucamprv.freshdesk.com/support/solutions/articles/44001786356-re-grounding-the-alde-system
Our Alde didn't have a ground wire from Alde to ground busbar, but I added one before extending it from there to the front J-box, then to the battery neg (via a negative battery busbar close to the battery & connected via 6G cable).