T@B 400 cover

Bobber

Just bought a T@B 400. We had a Maxi Air vent installed on the roof. Was wondering if anyone has tried to put a T@B cover over this? We owned a Dutchman T@B for 5 years but didn’t have the vent installed..

NorthIsUp

This is our 2019 T@B 400 Boondock Lite with the MaxxAir II vent covering the Fantastic fan. Plenty of room for the MaxxAir II and the cover still hangs down pretty far considering it's a Boondock Lite with the extra height. (I need the pull the straps a bit tighter, I know)

Good luck with the new trailer. 

DenisP

2018 Tab 400 with Aeroflow vent fan cover which fits under cover for R-Pod 171. 

Bobber

Thanks much for the reply and pics.?T@B on😄

mjpalmer

Hi there.  What cover did you purchase?  We are looking for a cover for our t@b 400 and only really see the Paha Que one that is $500. 

DenisP

 

The model I used last winter with my 400: PermaPRO Deluxe R-Pod Cover, Fits up to 18' 8" RVs - Lightweight Ripstop Fabric with RV Cover - Model 2

jimcenname

DenisP: How well does the door opening on the cover line up with the Tab400 door. I notice the cover is designed for the RPOD so I am curious about the door opening. Thanks in advance, Jim

DenisP

While the door opening is not perfectly aligned for the 400, the door is readily accessible.  We accessed the door multiple times during the winter storage season without problem.

rh5555

@DenisP I'm seeing conflicting dimensions for your cover.  Amazon thinks this is too short and narrow for the TAB400.  Can you confirm its actual size?

DenisP

The cover fits as shown in my previous pictures. My 400 has an Aeroflo fan cover and it fits over that also.  IMHO the cover is good for a few New England winters not a forever cover. For the money it is a good solution for short term protection. Compared to the quality and durability of the much more expensive tailored Pahaque 400 cover it pales in comparison.

jimcenname

I just bought the Classic Accessories PermaPro Heavy Duty R-Pod Travel Trailer Cover, Model 2 from Amazon and it fits nicely and covers the tub up front. the door opening lines up close enough. 

https://www.amazon.com/gp/product/B018M3JE8K/ref=ppx_od_dt_b_asin_title_s00?ie=UTF8&psc=1

rhyno

Sorry to resurrect an old thread but will this specific PolyPro3 Model 2 #80-199-151001-00 cover fit the 2021 T@b 400? The older links and size/length descriptions on Amazon seem to be changing a bit. 
https://www.amazon.com/Classic-Accessories-OverDrive-PolyPro-Teardrop/dp/B00GZLR6XC/ref=sr_1_1?keywords=80-199-151001-00&qid=1571074395&s=automotive&sr=1-1

Denny16

Not likely, the cover you referenced is for trailers up to 16-feet, who would fit a 320.  But the TaB400 is 18+ feet long.
cheers