Categories
- All Categories
- 86 Dutchman and Vintage TaB Archives
- 5 Forum Rules
- 3 nüCamp & Forum Contacts
- 851 Air Conditioning & Refrigeration
- 2.2K Battery/Electrical & Solar
- 1.2K Camping & Travel
- 123 Events & News
- 212 Factory Comments
- 35 "FOR SALE" - New/Used Trailers
- 17 “FOR SALE" - Camping & Trailer Gear
- 2.1K Heating/Plumbing & Winterizing
- 124 Help - Computer & System
- 884 Introductions
- 367 Looking to purchase a trailer?
- 1.9K Modifications & Upgrades
- 1.3K Products and Accessories
- 307 Service/Maintenance & Recall Notices
- 37 Solo Travelers Hints & Tips
- 1 T@G Forum
- 63 Teardrop Groups & Links
- 66 Testimonials
- 859 Tips & Tricks
- 1.4K Trailer & Towing
- 26 Owners Manuals/PDF Files/Videos & Resources
- 59 üCamp Rally - News & Information
PSA: Remember to Clean Your A/C Filter
jkjenn
Member Posts: 6,391
I was doing odds and ends around the T@b, including some spring cleaning and pulled out the a/c filter to clean it. Given the set up, it isn't apparent how you do it, so, I thought I'd share the easy process for the S Maxx models. In less than a year, there was enough debris to clean that it made this a worthwhile exercise.
1. Remove the two square faced screws holding the trim around the a/c to remove the trim with a #1 size square screwdriver.
2. Pull the filter from the pull tab in the right side if the unit. The filter will need to bend due to the tight fit to the wall.
3. Clean the filter.
4. Replace the filter.
5. Replace the trim. Make sure the holes in the trim line up with the holes in the cabinet so that you don't unintentionally start new holes.
2021 T@b 320 Boondock "Mattie Ross" | 2021 T@b Nights: 239 | Total nights in a T@b 455 | 2022 Jeep Grand Cherokee L Overland | T@b owner since 2014
Comments
Cool, can you share the link here, for posterity?
2021 T@b 320 Boondock "Mattie Ross" | 2021 T@b Nights: 239 | Total nights in a T@b 455 | 2022 Jeep Grand Cherokee L Overland | T@b owner since 2014
Bottom line - simply pull the right side out. Warning- cleans itself when being pulled out so you may want to use vacuum before pulling or dust goes everywhere.