Bracing a Jack-It bike rack

stevewz
stevewz Member Posts: 10
in Products and Accessories

For those who've installed a Jack-It bike rack on the tongue of their T@B, have any installed vertical braces from the V part down to the tongue platform behind it, perhaps between the jack and the tongue box, to bear some of the weight and reduce stress and strain on those components?

For context, I have a 2024 T@B 320S, the kind with the aluminum platform.

TAB-tongue.jpeg

2024 T@B 320S Boondock. TV: 2018 Honda Pilot w/6-speed transmission. Location: Western Oregon. See Ruckerworks.com for the rest.

Comments

  • Mobean
    Mobean Member Posts: 74

    I have used the Jack-it rack with 2 road bikes as provided (without additional support) since 2021 without issues. I do not believe extra bracing would change the tongue weight but suppose it would decrease component stress and stain. Then again, any such additional support may get in the way of access to the box and platform. I don't think it is necessary if you stay within the manufacturer's recommended weight limits.

    2021 320S BD
    2020 V6 Chevy Colorado
  • stevewz
    stevewz Member Posts: 10

    I'm not worried about tongue weight, but was thinking about strain on the Jack-It V brace itself. Thanks for the feedback. 🤙

    2024 T@B 320S Boondock. TV: 2018 Honda Pilot w/6-speed transmission. Location: Western Oregon. See Ruckerworks.com for the rest.

Categories