Replacing the Kitchen Faucet

newell · February 2018

I would like to replace the kitchen faucet in my 2017 T@B 320s. I have the single handle with the spout that goes up and down but not side to side. I have read here on the forum that my choices are probably bathroom faucets and I'm fine with that. I want a spout that can be turned from side to side and also have two handles so I can control hot and cold separately. I saw on the mods video from the 2018 T@Bazona that MandyLea had done that someone had just what I want. Does anyone out there have any ideas for me?

RollingBnB · February 2018

This is the one we used a Scandvik 70002 and one place to buy from. https://www.amazon.com/Scandvik-Marine-Swivel-J-Spout-Galley/dp/B002IVEC0I/ref=sr_1_4?ie=UTF8&qid=1518270673&sr=8-4&keywords=scandvik+faucet

ScottG · February 2018

@newell, you just described the faucets that were previously installed in T@Bs and everybody complained about! :-)

Seriously, those weren't so great, either, as the spout was barely long enough to get water in to the sink. Many of us solved the issue by installing a cheap swivel aerator, but a few people upgraded their faucets to something like you describe. Hopefully somebody will chime in, but if not I'm pretty sure there are some detailed posts and photos here somewhere.

newell · February 2018

Here is a screen shot of the one I was talking about on MandyLea's video. Hope that's okay MandyLea. Upon reflection, Susan says she would prefer a single handle but would like the spout to turn. Any thoughts?

RollingBnB · February 2018

Yeah, that's mine. See above for web site. Check out other Scandvik models for one arm. They are solid brass and will outlast the trailer,

newell · February 2018

I went to the Scandvik site to see what else is out there. Some need a 1" cutout, others need 1 3/8". Anyone know the cutout with the factory installed faucet?

larrygon · February 2018

We replaced ours with a bar faucet that had a pull out head. It was the older standard 3 hole but they make single hole models.

A quick search found this one that looks really interesting. I have no experience with it but looks like it could work. The best is that it is only $49.99!

https://www.amazon.com/Neady-Functional-Commercial-Sprayer-Adjustable/dp/B077HFZQ7L/ref=sr_1_6?s=kitchen-bath&ie=UTF8&qid=1518372624&sr=1-6&refinements=p_n_feature_three_browse-bin:542710011

newell · February 2018

That looks really nice and the price is nice too. I'm a little unsure of the size though being a kitchen faucet. I've been looking at the Scandvic marine galley faucets like the ones above that are down sized a little for a boat galley. I wish I could find one that has all the features that this one has in the smaller size but so far the choices seem to be limited. I've also been looking at Stasis and Nautius brands too.

ybakos · June 2023

Was recommended this one and just installed it. It's great.

https://www.amazon.com/dp/B092YSBW7X

Replacing the Kitchen Faucet

Comments

Categories