@DanWeitzel, they were 1-inch clamps and half inch wide, from Amazon..Koehler Enterprises KE12BX 10 Piece Hose Clamp Box (Size SAE 12),Silver https://a.co/d/hxrwjlzI think this was the absolute minimum size that would work, as I found myself wishing they were a bit larger, as they were more difficult to get started, especially if you had to use only one hand. I liked the 1/2" width though - seems optimal to me. If I had to do over, I'd get the next larger size over 1-inch.
This is how mine normally looks, except the light on the little black switch is off when not in use. The hole has a very soft silicone rubber plug that fits snugly but can be easily pulled out with t… (View Post)
Yes, @AnOldUR, that could work! The only issue I see, due to the low position of the tank, is finding a place to mount the tube where it's not obscured by a cushion/seat back. It could work in our T@… (View Post)
I mounted a mirror on the back wall to make viewing easier.. That's the minimum I would do, but I also added a built-in light/switch & peephole so I don't have to keep un/screwing around with rem… (View Post)
I seem to recall there was a maintenance bulletin some years ago about checking seals around wheel wells and under the door, where road spray could enter. This included removing the outside fenders o… (View Post)
I made one myself - scroll down to the last photo in this post.. https://tab-rv.vanillacommunity.com/discussion/comment/93950/#Comment_93950 Still works fine. Sometimes, my wife will pull the last to… (View Post)