@DanWeitzel, they were 1-inch clamps and half inch wide, from Amazon..Koehler Enterprises KE12BX 10 Piece Hose Clamp Box (Size SAE 12),Silver https://a.co/d/hxrwjlzI think this was the absolute minimum size that would work, as I found myself wishing they were a bit larger, as they were more difficult to get started, especially if you had to use only one hand. I liked the 1/2" width though - seems optimal to me. If I had to do over, I'd get the next larger size over 1-inch.
Just fyi, here's what our A/C drain pan looks like with the unit removed.. Ours slopes away from the vent wall & slightly towards the front. The drain hole is in that little extension towards the… (View Post)
@Marceline, Below are my photos of the method I used, with the PWM controller mounted in the empty space, speed control knob mounted underneath it, and 3-way switch rewired as on/off switch. (I made … (View Post)
Ditto what Sharon said - when bed is made, we pop the top off & slide it & the L-shaped support under the bed. The real problem, IMO, is that it's just too big. So, we've done like many other… (View Post)
Since our missing brake adjustment hole plugs seems to be a common issue (& I have an idea why), I thought I'd share this source for replacements, which are a nice quality rubber & a perfect … (View Post)