BrianZ
@DanWeitzel, they were 1-inch clamps and half inch wide, from Amazon..Koehler Enterprises KE12BX 10 Piece Hose Clamp Box (Size SAE 12),Silver https://a.co/d/hxrwjlzI think this was the absolute minimum size that would work, as I found myself wishing they were a bit larger, as they were more difficult to get started, especially if you had to use only one hand. I liked the 1/2" width though - seems optimal to me. If I had to do over, I'd get the next larger size over 1-inch.
-
Re: Rear USB Ports Dead - Replaced
Just a followup on my replacement USB sockets, cigarette lighter USB adapter, and the wire tap solderless splice connectors.. All are still working fine now, four years later, even though our newer m… (View Post) -
Re: Norcold N180.3
Try setting temp dial on 3 snowflakes. Propane can be a little tricky.. Turn on the tank valve very slowly, wait a min or so, then it may take a number of tries before you hear the flame ignite. Try … (View Post) -
Re: Am I missing a cap?
We had a similar issue on our 320's A/C air vent when a tree branch pulled ours off, breaking a part, but leaving the screw on the base. Fortunately, I had installed an outdoor temp sensor insid… (View Post) -
Re: Scary incident - and questions
As @Marceline suggested, a mirror or cell phone would let you check the hitch easily. (View Post) -
Re: Installing a Victron Battery Monitor
@Red_Rover, One of the links above shows my victron shunt box installation in the tub. I later added a second similar box for bus bars, to clean up all the wires going into the battery box.. https://… (View Post)
