BrianZ
@DanWeitzel, they were 1-inch clamps and half inch wide, from Amazon..Koehler Enterprises KE12BX 10 Piece Hose Clamp Box (Size SAE 12),Silver https://a.co/d/hxrwjlzI think this was the absolute minimum size that would work, as I found myself wishing they were a bit larger, as they were more difficult to get started, especially if you had to use only one hand. I liked the 1/2" width though - seems optimal to me. If I had to do over, I'd get the next larger size over 1-inch.
-
Re: Surge Protector Recommendation
Most suggest removing the jumper to get the 136 sec delay for the T@B A/C. Yesterday, I wrote to Danby, the manufacturer of our window unit, and asked whether our model has any built-in timer delay … (View Post) -
Re: Need Help - Mixing Valve Leaking
Bleeder screw strikes again.. Third time is not a charm for that pesky bleeder screw in the mixing valve. Fortunately, I just happened to discover it not too long after hooking up to city water while… (View Post) -
Re: Victron App and Multimeter Seem to Show Different States of Charge- Resolved
Maybe this from our Victron controller manual would explain the current readings.. "PV voltage must exceed Vbat + 5V for the controller to start. Thereafter minimum PV voltage is Vbat + 1V."… (View Post) -
Re: Corrosion of Alde Convectors
I find this issue of pH very interesting, both with reference to the glycol solution, its secret additives (which seek to adjust the pH), and the relationship of pH to the corrosion process. Apparen… (View Post) -
Re: Corrosion of Alde Convectors
Haven't yet drained our glycol, but getting closer. I wanted to first get the convectors exposed for inspection for corrosion later, so tackled the removal of the rear storage bin. Removing the 7 scr… (View Post)
