BrianZ
@DanWeitzel, they were 1-inch clamps and half inch wide, from Amazon..Koehler Enterprises KE12BX 10 Piece Hose Clamp Box (Size SAE 12),Silver https://a.co/d/hxrwjlzI think this was the absolute minimum size that would work, as I found myself wishing they were a bit larger, as they were more difficult to get started, especially if you had to use only one hand. I liked the 1/2" width though - seems optimal to me. If I had to do over, I'd get the next larger size over 1-inch.
-
Re: 2nd Time Leak at Hot Water Mix Valve Assembly in 2020 T@B 400
Our mixing valve bleeder screw hasn't leaked since using the blue Loctite I mentioned at the end of the link @Sharon_is_SAM posted. On the other hand, just tightening lasted 3 years, and it's only be… (View Post) -
Re: Empty glycol tank
Could be a stuck or faulty air bleeder valve at the top of the Alde, which should normally only release air from the system, but could release glycol to the ground from the drain hose. Also, the valv… (View Post) -
Re: Towing Capacity Guide
For what it's worth, here are our towing weights, last time I did a complete check.. https://tab-rv.vanillacommunity.com/discussion/comment/113925/#Comment_113925 We're probably due for another check… (View Post) -
Re: Alde Glycol Tank Anode Rod Mod
This is my 5-month update after installing a sacrificial magnesium anode rod inside our glycol expansion tank. As you can see from the next couple of photos, there is significant corrosion visible on… (View Post) -
Re: Battery Spaghetti Fix - Bus Bars
Good catch, @MadCityJack, and yes, I removed the strip of 7 terminals, which I seem to recall were bolted inside the box, so easy to remove. It's been a while, but I also recall using a dremel tool t… (View Post)
