Dalehelman

I just replaced the crank with if I remember a 1/2” bolt. Just pop off the top cover for access. I think it was a 6” bolt. I cut off the thread. Then I drilled a small hole in it to match the crank handle. If you are not good with tools. Ask a friend or neighbor. Good luck 

• Activity
• Posts121
• Comments2.3K

• Re: Alde hot water leak

  Dalehelman

  June 2023
  Wow that’s going back a few years. My memory is a little weak on that particular issue. If I remember right the silicone on the threads and the o ring did the trick. Be careful not to over tighten an…
  4

• Re: Power tongue Jack cost less than a buck

  Dalehelman

  June 2022
  We sold our Tab about a year ago. Then bought ourselves another boat. We live about 10 minutes from lake Coeur d’Alene in northern Idaho. Kinda miss our Tab, but we no longer go south for the winter. 
  3

• Re: One last try

  Dalehelman

  May 2018
  I think you may have a blockage in the Fresh water supply line to the pump. Disconnect the hose from the “IN” side of the pump. Try blowing or use compressed air back through the hose back into the w…
  1

• Re: Attention all Spokane and Pacific NW T@D@ T@B and T@G enthusiasts monthly breakfast

  Dalehelman

  April 2023
  I would like to stop by if it’s OK?
  2

• Re: Hitch issues

  Dalehelman

  September 2017
  Here is the video http://tab-rv.vanillaforums.com/discussion/5229/coupling-issues-hitching-issues-couple-stuck-on-the-ball-stuck-coupler#latest
  1

Next