Horigan

If connecting an Li charger “directly” to the battery, be sure to connect the negative charging wire to the Load side of the shunt. When I added a solar charger and an Li charger, I replaced the one … (View Post)

I’ll be interested in the test results. At 110V you may find some small efficiency increase on an absorption refrigerator over 12V, but I suspect the inverter inefficiencies will overwhelm any 110V e… (View Post)

A couple of things. The solar charger is typically connected between the battery and the circuit breaker, so it should have still charged your battery. Make sure your chargers are reconfigured to Li.… (View Post)

Hmmm. That response doesn't make much sense. Batteries connected in parallel pretty quickly balance out to the same voltage. If one is higher voltage it quickly charges the lower voltage battery unti… (View Post)

Even with the correct battery type on your Victron Smartshunt, you'll need to do a few of things. 1) Make sure the Smartshunt has the correct battery capacity loaded. 2) Make sure your chargers, sola… (View Post)