@Trailpixie Your numbers are close. Some considerations. Pulling 1000W from a 12.5V circuit requires 80 amps, not amp-hours. You need to consider the efficiency loss of the inverter, so I would assum… (View Post)
The concern with an incomplete charge is real since it doesn't give the battery an opportunity to balance the cells, but if you have solar set to lithium, that concern goes away. (View Post)
Note that the SOK terminals are bolts, so you may need to replace your wire ends with large ring terminals. You need a pretty good crimp tool to do this on large battery wires. I don't know if your c… (View Post)