If you want to get more accurate readings on the batteries' state of charge, but don't want to commit the time and money to a hardwired battery monitor, you can spend about $10 and get an Innova vol… (View Post)
I doubt the two are correlated. The booster runs only on 12V DC. You are either getting it directly from a 12V DC source (cigarette lighter socket) or you're getting it from a 110V AC source which i… (View Post)
The Jensen is on the 12V side. Doesn't make any sense that cycling the GFI outlets would do anything unless you have something plugged into 110v AC that is sending a control signal to the Jensen. Is … (View Post)
Yep. They had to remove the tub basically for one reason. You can install the brackets on the frame loosely, slide them back toward the tub and then continue to torque down the nuts with an open-ende… (View Post)
I finally got around to installing my e2 this weekend. Same set up as yours. I found that to make adequate room for the specialty link plates and the really long bracket bolts that come with the sta… (View Post)