-
Re: Alde Not Heating - Need Bleeding?
The heating elements require 120V AC or propane to operate. The heaters can not run on 12V DC. However, 12V DC (either from the battery or the converter) is required to run the Alde's operationa…1 -
Circuit Breakers (and Fuses) Mislabelled
Recent posts have prompted me to poke and prod the T@B's innards in an effort to understand how all the parts fit together. In doing so, I noticed that the AC circuits attached to the individual…1 -
Re: Small Clear Tubing Running Into/From the Fresh Water Tank Still has Water Visiable after Winterizing
It sounds like you are describing the fresh water tank vent. It exits at the small hole just above the filler (see photo below). I doubt a little water in there will hurt anything, but if it makes yo…2 -
Re: Norcold exhaust fan installation
Mine was only sealed with a little bead of silicone caulking, which I easily scraped off once the vent was popped out. I replaced it with the same. However, somebody else posted recently that their v…1 -
Re: T@B Battery
I just checked out this link. Very helpful--thanks, Verna. For those who care about such things, I noticed that--like my paper manual--the FAQ states that bulk mode kicks in when the battery is belo…1
