barbarella20722

@fstop32 indeed! Last thing related to my little, Alde adventure. I used bolts on the long wood piece in the bed area. No more fighting with screws if I have to remove it again. Now I can work on doi… (View Post)

Filled the glycol, let it run for about 45 minutes. No leaks, blead the line and everything seems to be running well. Now to start putting things back together. Cleaned up the wires first. I realized… (View Post)

PS dinette access: Started with a hole saw towards the front. Used the oscillating tool to cut the rest out. I put a board behind to protect the wall and wires. I used bolts, washers and nuts tighten… (View Post)

First access point. I modified the dinette a while ago to a full-time couch configuration. I cut the plywood in half and used the back section as an access door. I'll attach the front portion after I… (View Post)

I got two convectors installed today. Kitchen and DS dinette. Originally one of the hoses was too long. Pushing down on the stub. This is what it looks like now. I cut the hose to fit, moved some of … (View Post)