manyman297

There’s not really a way to align these axles. Typically when wear is uneven like that you’d need to look into an issue with the hubs, inflation (not likely) or a defective axle. There have been issu… (View Post)

Check rivets on frame especially where the tongue connects to the main frame. While not a problem with 400s there have been reports on 320s of this area cracking on the frame due to stress at this po… (View Post)

Yes, Nucamp’s cabinetry team is a little overzealous about tightening screws. Many of our cabinet hardware screws were overdriven and stripped. Wood glue and toothpicks and predrill and your screws w… (View Post)

Wanted to do a quick update on the delaminating floor issue. Several (and I mean several) areas began delaminating early this year. The repair procedure detailed above still works great and, to me, i… (View Post)

After our last trip (1700 miles) I noticed the floor covering was starting to bubble in a couple of spots. One area was pretty minor but the other was maybe 2x6 inch area below the wardrobe. I wanted… (View Post)