rfuss928

I searched and didn't find this. Thanks, Probably a better location for my post... The screen was not that difficult to remove if your familiar with snap clips in a groove. The deposits on mine woul… (View Post)

As I de-winterized this spring I discovered the hot water flow was severely limited. It was always a bit less than the cold side when wide open but very usable with no noticeable compromises. Now, th… (View Post)

For many years we were okay with the OEM cushions and a memory foam topper in SUNT@B (2009 CS). Not the case with our UT. The standard cushions didn't fill the bed space very well leaving gaps everyw… (View Post)

Being aware of the constant confusion and inconsistencies I decided a bit of labeling was in order... (View Post)

If you loosen the red clamp lever several turns the entire assembly should be loose. The crank with the outer tube should lift out the top or push out the bottom as you crank the wheel tube up inside… (View Post)